Fishfinder / Transducers

The GSD 26 digital sonar ushers in the next evolution of sportfishing technology, providing unrivaled target separation at far greater depths than traditional sonar. Discover Spread Spectrum Clarity For serious deep-sea sportfishing, the GSD 26 takes high-definition targeting to a whole new level. With a compatible transducer, the GSD 26’s Spread Spectrum technology scans on multiple frequencies at one time, returning vast amounts of data to the receiver. As a result, you can expect precise, shallow-water-like target separation at much greater depths – up to 10,000 ft (3,000 m). Learn More

The gWind transducer features twin-fin technology with 3-bladed propeller for more accurate TWS in lighter air while the twin-fin design gives a more stable TWA. The 3-bladed propeller, unlike a cups design, is always efficient. Combined with optic reading this transducer provides superior accuracy at low wind speeds and also provides for excellent linearity. Learn More

The best performing and only 1 kW transom mount, this bare wire transducer has a maximum depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 85 to 135 kHz; a beamwidth of 16 to 25 degrees or 11 to 16 degrees; and mounts on a 3 to 21 degree transom. Learn More

Our entry level in-hull transducer with an adjustable deadrise angle makes installation a snap. The 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise. Learn More

Our plastic thru-hull mount transducer performs well at high speeds. - For use with GSD24, GPSMAP 557XS, 751XS An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise Learn More

This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units. The 500 W 8-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 40 to 10 degrees; and mounts on a 0 to 70 degree transom. Learn More

Our plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 8 to 15 degree deadrise. Learn More

Our plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 8 to 15 degree deadrise. Learn More

Our plastic in-hull transducer is perfect for in-hull mount, trolling motors or ice fishing. The 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees Learn More

Our plastic transom mount provides depth, speed and temperature in 1 package. This 8-pin 500 W triducer has a maximum depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and mounts on a 3 to 20 degree transom. Learn More

This dual beam transducer replaces the one included with your echo™ series fishfinder. A 500 W 8-pin transducer, it has an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and mounts on a 0 to 70 degree transom. Learn More

Garmin Smart Senor Thur-Hull Depth/Speed/Temp NMEA2000 Transducer (DST800) DST800 Thru Hull Active Depth, Speed and Temperature Transducer Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer. Airmar's Smart™ Sensors have embedded microelectronics, meaning the signal is processed from within the transducer itself, Learn More

Garmin Transom Mount Depth and Temp Transducer 200/50KHz, 10/40 deg, plastic transom mount transducer. Learn More

The GCV 10 black box sonar adds both SideVü and DownVü with CHIRP scanning sonar technologies to your compatible Garmin echoMAP or GPSMAP series combo (see compatible devices). Learn More

The GSD 24 features a vastly improved digital sonar design for superior target definition and deep-water performance. Get the Whole Picture With up to 2,000 Watts of transmit power and a high-dynamic range receiver, the GSD 24 brings high-definition imaging to your compatible Garmin chartplotter. The system is dual frequency (50/200 kHz) capable and offers selectable transmit power (600 W, 1 kW and 2 kW, depending on transducer) for pin-point accuracy at depths of up to 5,000 ft (1,500 m). So whether you’re out sportfishing or just keeping an eye on hazardous terrain and reef structures beneath your boat, you’ll see a clearer picture with enhanced separation of images and deeper bottom detection. Learn More